J/105 SAILS
|
|
CLASS MAINSAILS
P = 41.5
E = 14.6
Sail Area = 376 sq ft
Note: All prices below
are in US Dollars and are designated for delivery in North America.
Prices do not include shipping, tax or duty.
 © North Sails
CM-1 All-Purpose Mainsail $3,772
7.5oz Yarn Tempered Dacron
A great all-purpose mainsail designed for easy tuning and
trimming. Built from the best 7.5 oz yarn-tempered Dacron available, the
AP mainsail is extremely versatile and performs well over a wide range
of wind conditions. This is the sail of choice for boats that sail
primarily in under 18 knots.
HM-1 Heavy Air Mainsail $3,920
8.6oz Yarn Tempered Dacron
The HA mainsail is built from the highest quality 8.6 oz
yarn tempered Dacron available. It is the perfect sail for any boat that
sails the majority of the time in over 15 knots. Most recently,
slightly more luff curve has been added to the top of the sail to better
suit the mast bend.
SPECIFICATIONS:
» 1 Full Length Top Batten
» 3 Leech Battens
» 1 Class Reef
» Allslip or Kiwi Luff Slides
FEATURES:
» Shelf Foot
» Insignia
» Sail Numbers
» RBS Battens
» Cunningham
» High Modulus Leech Line
» Foot line
» Trim Stripes
» Fold Bag |
|
CLASS JIBS
I = 40.6
J = 13.5
LP = 102%
 © North SailsCJ-1 Aramid Class Jib $3,623
3DL 600 Aramid 16800 DPI
The 3DL CJ-1 jib is a refinement of design combining the
best features of our AP-1 and WV-1 from 2008. With a custom yarn layout,
increased DPI, finishing detail refinements and minimum class bag
weight of 23 lbs., this sail is the result of extensive testing. Proven fast in both light and heavy air, the CJ-1 jib
features a specialized vertical profile to allow for tight sheeting for
exceptional pointing ability.
New for 2012! HA-2 Aramid Class Jib $4,093
3DL 600 Aramid 19600 DPI
For 2012, the HA jib utilizes horizontal roll battens. The
3DL HA-2 Jib is optimized for the heavy air conditions. The draft
forward, straight leech design of the HA jib is ideal for the more windy
venues. For PHRF sailors, the HA jib is a perfect complement to your
overlapping genoa.
SPECIFICATIONS:
» 3 Tapered RBS Vertical Battens (CJ-1)
» Horizontal Roll Battens (HA-1)
FEATURES:
» High Modulus Leech Line
» Foot line
» Trim Stripes
» Sausage Bag
» Telltales / Telltale Window |
|
CLASS ASYMMETRICS
89 Square Meters
 © North SailsVForce All-Purpose
NorLon 75 $3,108
NorLite 70 OD $3,623
New! VMG Force
NorLite 70 OD $3,623
The new VMGForce asymmetric spinnaker was
designed to address the new class rule allowing two spinnakers to be
used in the same race. The VMGForce is designed for lighter air VMG
angles in winds of 10 knots or less. This sail is a full 89 sq meters
with flatter sections for easier light air flying in tighter angles.
VForce+ Heavy Air
NorLon 75 $3,108
NorLite 70 OD $3,623
New V-Series Designs!
Asymmetric spinnaker development continues to move
at a rapid pace. North has revolutionized spinnaker development with the
new Virtual Wind Tunnel, which accurately simulates downwind airflow
over unlimited dynamic range at 100% scale.
North’s J/105 team utilized VWT simulations in a quest to
develop a better J/105 spinnaker in all wind conditions. Various new
design shapes and sail geometries were tested against North’s standard
J/105 designs. The result is North’s new VForce J/105 asymmetrics,
featuring optimized sail sizing for increased actual surface area under
the 89m2 areas rule, greater driving force in all wind speeds, and
improved twist characteristics; leech twists easily in light air, yet
doesn’t over twist in heavy air. Constructed with North’s new NorLite
70OD, designed specifically for the J/105, the new VForce asymmetrics
will give North customers an even greater advantage.
FEATURES:
» High Modulus Luff and Leech Cord
» Sail Numbers
» Box Turtle Bag |
|
SAIL COVERS
» J/105 Sail Cover $424
» J/105 Sail Cover w/Custom Logo $550
» J/105 Wheel/Binnacle Cover $325
» J/105 Canvas Furling Sock $533
|